Icom

IC-M802

Discontinued by the manufacturer. HF Transceiver Key Featrues: Digital Signal Processor Built-in ITU Class E DSC One touch e-mail button* Automatic antenna tuner, AT-140 PDF Brochure

Brand: Icom
Category: Marine
Manufacturer: Icom website ↗
Availability: Enquire for lead time

Downloads

IC M802PDF

Technical

Specifications

Frequency coverage - Transmit	1.6–2.9999 MHz, 4.0–4.9999 MHz, 6.0–6.9999 MHz, 8.0–8.9999 MHz, 12.0–13.9999 MHz, 16.0–17.9999 MHz, 18.0–19.9999 MHz, 22.0–22.9999 MHz, 25.0–27.5000 MHz
Frequency coverage - Receive	0.5–29.9999 MHz
Power supply requirement	13.6 V DC ±15% (negative ground)
Dimensions (W×H×D) - Main unit	240×94×238.4 mm; 9.4×3.7×9.4 in
Dimensions (W×H×D) - Controller unit	220×110×84.4 mm; 8.7×4.3×3.3 in
Weight (approx.) - Main unit	4.7 kg; 10 lb 6 oz
Weight (approx.) - Controller unit	570 g; 1 lb 4 oz
Current drain - Transmit (High)	30 A typ. at max. power
Current drain - Max. audio output	3.0 A
RF output power (PEP)	150/60/20 W
Audio output power (10% distortion/4 Ω load)	4.0 W
Sensitivity at 10dB S/N - J3E, A1A (0.5–1.5999 MHz)	30 dBμV emf
Sensitivity at 10dB S/N - J3E, A1A (1.6–1.7999 MHz)	13 dBμV emf
Sensitivity at 10dB S/N - J3E, A1A (1.8–29.9999 MHz)	8 dBμV emf
Sensitivity at 10dB S/N - J2B, F1B (1.6–1.7999 MHz)	13 dBμV emf
Sensitivity at 10dB S/N - J2B, F1B (1.8–29.9999 MHz)	8 dBμV emf
Sensitivity at 10dB S/N - H3E (0.5–1.5999 MHz)	44 dBμV emf
Sensitivity at 10dB S/N - H3E (1.6–1.7999 MHz)	30 dBμV emf
Sensitivity at 10dB S/N - H3E (1.8–3.999 MHz)	24 dBμV emf
Sensitivity - DSC (J2B) (0.5–29.999 MHz, at 1% error rate)	0 dBμV emf

Overview

About this product

Advanced DSP marine radio with compact remote head

Other features

4×8-inch remote controller and 4×4-inch external speaker
Large LCD with dot matrix characters
Channel and Group dials offer easy channel selection and operation
Powerful 150W (PEP) output
0.5 to 29.9999MHz wideband receiver
DIN and RS-232C connectors for external equipment
NMEA 0183 interface included
1035 ITU, 160 programmable and 160 e-mail channels are available

Questions

Frequently asked questions

What frequency range does the Icom IC-M802 HF radio cover?

The IC-M802 receives continuously from 0.5-29.9999 MHz and transmits across the marine HF bands from 1.6-2.9999, 4.0-4.9999, 6.0-6.9999, 8.0-8.9999, 12.0-13.9999, 16.0-17.9999, 18.0-19.9999, 22.0-22.9999 and 25.0-27.5000 MHz.

What is the transmit power of the IC-M802?

The IC-M802 delivers selectable RF output power of 150W, 60W or 20W PEP.

How much does the IC-M802 weigh?

The IC-M802 main unit weighs approximately 4.7 kg and measures 240 x 94 x 238.4 mm; the controller unit weighs approximately 570g and measures 220 x 110 x 84.4 mm.

What is the power supply requirement for the IC-M802?

The IC-M802 runs on a 13.6V DC supply (negative ground) with a tolerance of plus or minus 15%, drawing up to 30A typical on transmit at maximum power.

GarminMarine
9-Axis Heading Sensor
A 9-axis heading sensor delivering compass output at 10 Hz with typical accuracy of plus or minus 2 degrees across the full 0 to 360 degree range.
Enquire →
SkyNavMarine
AIS-700E
A dual-channel AIS transceiver operating on both marine AIS channels with 2 W output power and a wide 9 to 40 V DC supply range.
Enquire →
AlincoMarine
Alinco DJ-MX1
SPECIFICATIONS Frequency range : Tx : 156.025-157.425MHz Rx : 156.050-163.275MHz Frequency stability : ±10ppm Antenna impedance : FM (16K0G3E) Rated voltage : 50 Ω Current Consumption : 0.35A (Max audio output) 1.5A (TX / 5W) / 0.9A (TX / 1W) (Battery life up…
1 downloadEnquire →
AlincoMarine
Alinco DJ-VX11
The Alinco DJ-VX11 is a waterproof VHF marine handheld radio rated IP67, offering 5W/2W/0.5W selectable output and around 230g weight including battery and antenna.
Enquire →